CAA交互模式的参数化设计

cwk_seu · 发表于 2011-12-17 18:52:36

马上注册登录，享用更多网站功能！

您需要登录才可以下载或查看，没有帐号？立即注册

x

想做一个交互模式的参数化的例子，现在交互界面做好了（如图），参数化驱动程序写完了，但是运行时一直有点问题，感觉应该是获取参数列表和参数赋值有问题，但一直解决不了，功能实现的主要代码如下，程序框架在附件上，请指点。

//内存中加载零件
HRESULT rc=E_FAIL;
CATDocument * pDocument=NULL;
CATUnicodeString ModelDocName="F:\savefile\catia_development\zhou.CATPart";
rc = CATDocumentServices::OpenDocument(ModelDocName,pDocument);
if (SUCCEEDED(rc))
{
CATInit *pInitOnDoc=NULL;
rc = pDocument->QueryInterface(IID_CATInit,(void**)&pInitOnDoc);

//获取零件的根容器
CATIPrtContainer *pIPrtCont = NULL;
pIPrtCont=(CATIPrtContainer *)pInitOnDoc->GetRootContainer("CATIPrtContainer");

//获取零件设计特征
CATISpecObject_var spSpecObjectPart = pIPrtCont->GetPart();
if (NULL_var != spSpecObjectPart)
{
//获取参数列表
  CATIParmPublisher * pIParmPublisher = NULL;
  rc = spSpecObjectPart->QueryInterface(IID_CATIParmPublisher,(void**)&pIParmPublisher);
  if (SUCCEEDED(rc))
  {
CATUnicodeString L1="L1";
CATUnicodeString L2="L2";
CATLISTV (CATISpecObject_var) List ;
CATICkeParm *pICkeParm = NULL;
pIParmPublisher->GetAllChildren("CATICkeParm",List);
int Nb = List.Size();
if ( Nb >= 1 )
{
  CATISpecObject_var specObj = List[1] ;
  rc = specObj->QueryInterface(IID_CATICkeParm,(void**) &pICkeParm);
}

//根据特征尺寸依次获取参数并赋值

if (pICkeParm->Name()==L1)
{
L1=pICkeParm->Content();
   CATUnicodeString msg;
double OutputReal;
msg = _pL1Editor->GetText();
int IsConversionOK = msg.ConvertToNum(&OutputReal);
OutputReal = OutputReal/1000;
pICkeParm->Valuate(OutputReal);
}
else
{
  L2=pICkeParm->Content();
  msg = _pL2Editor->GetText();
  int IsConversionOK = msg.ConvertToNum(&OutputReal);

  OutputReal = OutputReal/1000;
pICkeParm->Valuate(OutputReal);
}
ObjectUpdate(spSpecObjectPart);
  }
}
}