iCAx开思工具箱

标题: 一个关于CAA中测量重心的问题，请大家帮忙看看。 [打印本页]

作者: wangyuan1-1018 时间: 2005-6-17 08:39
标题: 一个关于CAA中测量重心的问题，请大家帮忙看看。
我写了一个测量零件重心的批处理程序，能通过CATIPrtPart获取CATIInertia指针，却不能从CATIInertia的重心属性。
#include "CATSessionServices.h"
#include "CATSession.h"
#include "CATDocument.h"
#include "CATDocumentServices.h"
#include "CATInit.h"

#include "CATIPrtContainer.h"
#include "CATIPrtPart.h"

#include "CATISpecObject.h"

#include "CATIInertia.h"

#include <iostream.h>

void main(int argc, char * argv[])
{
//CREAT SESSION
   char* sessionName = "

artmeasure_Session";
CATSession* pSession = NULL;
   HRESULT rc = : : Create_Session(sessionName,
                        pSession);
if (FAILED(rc))
{
   cout <<"create session erro!" <<endl <<flush;
   return;
}

//open doc
CATDocument* pDoc = NULL;
rc = CATDocumentServices : : OpenDocument(argv[1],
                              pDoc);
if (FAILED(rc)||NULL==pDoc)
{
   cout << "open document erro!" <<endl <<flush;
      return;
}

//Queries on the document to get the root container
   CATInit* pDocInit = NULL;
   rc = pDoc -> QueryInterface(IID_CATInit,
                              (void**) [$pDocInit)]
if (FAILED(rc))
{
   cout <<"Query CATInit erro!" <<endl <<flush;
   return;
}

CATIPrtContainer *pSpecContainer = NULL ;
   pSpecContainer = (CATIPrtContainer*)pDocInit->GetRootContainer("CATIPrtContainer");
if (FAILED(rc)||NULL==pSpecContainer)
{
   cout <<"Query CATIPartContainer erro!" <<endl <<flush;
   return;
}

pDocInit->Release();
pDocInit = NULL;

//Retrieve CATIPrtPart

CATIPrtPart_var spPart = pSpecContainer -> GetPart();
if (NULL_var == spPart)
{
   cout <<"Retrieve CATIPrtPart_var erro!" <<endl <<flush;
   return;
}
   pSpecContainer->Release();
pSpecContainer=NULL;

//Query CATIInertia
   CATIInertia* piInertia = NULL;
rc = spPart -> QueryInterface (IID_CATIInertia,
   (void**) [$piInertia)]
   if (SUCCEEDED(rc) && NULL != piInertia)
{
   cout <<"Query CATIInertia OK!!" <<endl <<flush;
}
else
   return;

double theCOGposition[3];
rc = piInertia -> GetCOGPosition(theCOGposition);
if (SUCCEEDED(rc))
{
   cout <<"The COGposition is :" << theCOGposition[0] <<"  "<<theCOGposition[1] <<"  " <<theCOGposition[2] <<endl <<flush;
}
else
   return;

piInertia->Release();
piInertia = NULL;

rc = CATDocumentServices : : Remove (*pDoc);
if (FAILED(rc))
{
   cout <<"Doc Delete erro!"<<endl<<flush;
   return;
}

rc = : : Delete_Session("

artmeasure_Session");
if (FAILED(rc))
{
   cout <<"Session Delete erro!"<<endl<<flush;
   return;
}
}

作者: hick 时间: 2005-6-17 10:56
加：
CATISpaEnvironment *piSpaEnvironment = NULL;
rc = pDoc->QueryInterface(IID_CATISpaEnvironment,
                        (void**)[$piSpaEnvironment)]
piSpaEnvironment->Init();

作者: wangyuan1-1018 时间: 2005-6-17 11:12
OK了，多谢高手指点。不过又出现单位问题。。。

作者: wangyuan1-1018 时间: 2005-6-17 15:45
//Retrieve CATIInertia's feature
  double thedensity;
  double themass;
    rc = piInertia -> GetMass([$thedensity,&themass)]
  if (SUCCEEDED(rc))
  {
    cout  <<"The Density of The Part is : "<<thedensity <<endl<<flush;
    cout  <<"The Mass of the Part is : "<<themass <<endl<<flush;
  }
  else
    return;

  double theCOGposition[3];
  rc = piInertia -> GetCOGPosition(theCOGposition);
  if (SUCCEEDED(rc))
  {
    cout <<"The COGposition is :" << theCOGposition[0] <<"  "<<theCOGposition[1] <<"  " <<theCOGposition[2] <<endl <<flush;
  }
  else
    return;

double theInertia[9];
  rc = piInertia -> GetInertiaMatrix([$thedensity,theInertia)]
  if (SUCCEEDED(rc))
  {
    cout <<"The Inertia of the Product is :"  ;
    for(int inerNum = 0; inerNum < 9; inerNum++)
    {
     if(inerNum%3==0)
       cout <<endl <<flush;
     cout << theInertia[inerNum] <<"  ";
    }
  }
  else
    return;

这段红色代码造成两种不同的打印结果（如下图中的1、2），这次因该是单位原因。一开始是标准的单位，为什么添加红色代码后就单位就改变了呢。通过什么方法可以获取和控制显示结果的单位。

作者: wangyuan1-1018 时间: 2005-6-21 15:42
欢迎灌水。。。

作者: wangyuan1-1018 时间: 2005-6-22 08:58
没人知道是怎么回事么？

作者: wangyuan1-1018 时间: 2005-7-13 15:21
#include "CATSessionServices.h"
#include "CATSession.h"
#include "CATDocument.h"
#include "CATDocumentServices.h"
#include "CATInit.h"

#include "CATIPrtContainer.h"
#include "CATIPrtPart.h"

#include "CATISpecObject.h"

#include "CATIInertia.h"
#include "CATISpaEnvironment.h"

#include <iostream.h>

void main(int argc, char * argv[])
{
//CREAT SESSION
    char* sessionName = "

artmeasure_Session";
  CATSession* pSession = NULL;
    HRESULT rc =

reate_Session(sessionName,
                          pSession);
  if (FAILED(rc))
  {
    cout <<"create session erro!" <<endl <<flush;
   return;
  }

//open doc
  CATDocument* pDoc = NULL;
  rc = CATDocumentServices

penDocument(argv[1],
                             pDoc);
  if (FAILED(rc)||NULL==pDoc)
  {
    cout << "open document erro!" <<endl <<flush;
        return;
  }

//Queries on the document to get the root container
    CATInit* pDocInit = NULL;
    rc = pDoc -> QueryInterface(IID_CATInit,
                             (void**) [$pDocInit)]
  if (FAILED(rc))
  {
    cout <<"Query CATInit erro!" <<endl <<flush;
    return;
  }

  CATIPrtContainer *pSpecContainer = NULL ;
    pSpecContainer = (CATIPrtContainer*)pDocInit->GetRootContainer("CATIPrtContainer");
  if (FAILED(rc)||NULL==pSpecContainer)
  {
    cout <<"Query CATIPartContainer erro!" <<endl <<flush;
    return;
  }

  pDocInit->Release();
  pDocInit = NULL;

//Initiate Enviroment
  CATISpaEnvironment *piSpaEnvironment = NULL;
    rc = pDoc->QueryInterface(IID_CATISpaEnvironment,
                        (void**)[$piSpaEnvironment)]
    if(SUCCEEDED(rc))
    cout <<"QI IID_CATISpaEnvironment OK!!!" <<endl <<flush;
  else
    return;
    piSpaEnvironment->Init();
  cout <<"Initiate Enviroment ok!!" <<endl <<flush;

//Retrieve CATIPrtPart

  CATIPrtPart_var spPart = pSpecContainer -> GetPart();
  if (NULL_var == spPart)
  {
    cout <<"Retrieve CATIPrtPart_var erro!" <<endl <<flush;
    return;
  }
    pSpecContainer->Release();
  pSpecContainer=NULL;

//Query CATIInertia
    CATIInertia* piInertia = NULL;
  rc = spPart -> QueryInterface (IID_CATIInertia,
    (void**) [$piInertia)]
    if (SUCCEEDED(rc) && NULL != piInertia)
  {
    cout <<"Query CATIInertia OK!!" <<endl <<flush;
  }
  else
    return;

//Retrieve CATIInertia's feature
  double thedensity;
  double themass;
    rc = piInertia -> GetMass([$thedensity,&themass)]
  if (SUCCEEDED(rc))
  {
    cout  <<"The Density of The Part is : "<<thedensity <<endl<<flush;
    cout  <<"The Mass of the Part is : "<<themass <<endl<<flush;
  }
  else
    return;

  double theCOGposition[3];
  rc = piInertia -> GetCOGPosition(theCOGposition);
  if (SUCCEEDED(rc))
  {
    cout <<"The COGposition is :" << theCOGposition[0] <<"  "<<theCOGposition[1] <<"  " <<theCOGposition[2] <<endl <<flush;
  }
  else
    return;

    double theInertia[9];
  rc = piInertia -> GetInertiaMatrix([$thedensity,theInertia)]
  if (SUCCEEDED(rc))
  {
    cout <<"The Inertia of the Product is :"  ;
    for(int inerNum = 0; inerNum < 9; inerNum++)
    {
     if(inerNum%3==0)
       cout <<endl <<flush;
     cout << theInertia[inerNum] <<"  ";
    }
  }
  else
    return;

  piInertia->Release();
  piInertia = NULL;

  piSpaEnvironment -> Release();
  piSpaEnvironment = NULL;

//Remove Doc And Delete Session
  rc = CATDocumentServices::Remove (*pDoc);
  if (FAILED(rc))
  {
    cout <<"Doc Delete erro!"<<endl<<flush;
   return;
  }
  
  rc = :

elete_Session("

artmeasure_Session");
  if (FAILED(rc))
  {
    cout <<"Session Delete erro!"<<endl<<flush;
   return;
  }
}

//以上是完整代码，和大家分享，欢迎交流，欢迎指导。。。。

欢迎光临 iCAx开思工具箱 (https://t.icax.org/)